Step
Action and questions
POR the machine, and perform a
9
PRINT test.
Go to
"PRINT TESTS" on
page
3-26.
Does the error continue?
200.03 Sensor (registration) late jam (feeding from the MPF)
Step
Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the Sensor (registration)
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (registration).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (registration)
3
for proper connection.
Is the above component
properly connected?
Check the registration drive
4
motor for proper operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Registration motor.
Does the above component
operate properly?
Check the registration motor for
5
proper connection.
Is the above component
properly connected?
Yes
Replace the upper printer engine
PCBA.
Go to
"Upper printer engine
PCBA removal" on page
4-189.
Yes
Go to step 2.
Go to step 4.
Replace the registration/transport
roll assembly.
Go to
"Registration/transport
roller assembly removal" on
page
4-152.
Go to step 6.
Replace the registration drive
motor.
Go to
"Registration drive motor
removal" on page
4-150.
7558-xxx
No
Problem resolved
No
Remove any media or media
fragments.
Go to step 3.
Replace the connections.
Go to step 5.
Replace the connection.
Diagnostic information
Previous
Next
Go Back
2-95