2Xx Service Error Codes - Lexmark X95x Series Service Manual

2xx service error codes

Error code
200.01
Paper jam
200.03
Paper jam
200.03
Paper jam
200.05
Paper jam
200.53
Paper jam
200.55
Paper jam
201.01
Paper jam
201.03
Paper jam
202.01
Paper jam
Description
Sensor (registration) static jam
Sensor (registration) late jam (feeding
from the tray)
Sensor (registration) late jam (feeding
from the MPF)
Sensor (registration) lag jam
Sensor (registration) late jam
80K interval for feed rollers exceeded
in tray 1
Sensor (registration) lag jam
80K interval for feed rollers exceeded
in tray 1
Sensor (media on belt) static jam
Sensor (media on belt) late jam
Sensor (fuser exit) static jam
Action
Media remains detected by the sensor
(registration) after power on.
Go to
"200.01 Sensor (registration)
static jam" on page 2-92.
The media is late reaching the sensor
(registration) within the specified time after
the registration clutch is turned on.
Go to
"200.03 Sensor (registration) late
jam (feeding from the tray)" on
page 2-93.
The media is late reaching the sensor
(registration) within the specified time after
the MPF pick solenoid is turned on.
Go to
"200.03 Sensor (registration) late
jam (feeding from the MPF)" on
page 2-95.
The media reached the sensor
(registration) but did not clear it within the
specified time.
Go to
"200.05/200.55 Sensor
(registration) lag jam" on page
The media is late reaching the sensor
(registration) within the specified time after
being fed from any given media tray.
Go to
"200.53 Sensor (registration) late
jam (80K interval exceeded for feed
rolls)" on page 2-98.
The media reached the sensor
(registration) but did not clear it within the
specified time.
Go to
"200.05/200.55 Sensor
(registration) lag jam" on page
Media remains detected by the sensor
(media on belt) after power on.
Go to
"201.01 Sensor (media on belt)
static jam" on page 2-101.
The media is late reaching the sensor
(media on belt) within the specified time
after reaching the sensor (registration).
Go to
"201.03 Sensor (media on belt)
late jam" on page 2-102.
Media remains detected by the sensor
(fuser exit) after power on.
Go to
"202.01 Sensor (fuser exit) static
jam" on page 2-104.
Diagnostic information
7558-xxx
Previous
Next
Go Back
2-96.
2-96.
2-21