Sensor (Diverter Gate) Late Jam - Lexmark X95x Series Service Manual

Step Action and questions
Check the sensor (diverter gate)
3
for proper connection.
Is the above component
properly connected?
Check the finisher controller
4
PCBA for proper connection.
Is the above component
properly connected?
POR the machine.
5
Does the error continue?

482.03 Sensor (diverter gate) late jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (diverter gate)
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (diverter
gate).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (diverter gate)
3
for proper connection.
Is the above component
properly connected?
Yes
Replace the sensor (diverter
gate)
Go to
"Sensor (diverter gate)
removal" on page 4-393.
Go to Step 5.
Replace the finisher controller
PCBA.
Go to
"Finisher PCBA removal"
on page 4-356.
Yes
Go to step 2.
Go to step 4.
Replace the sensor (diverter
gate)
Go to
"Sensor (diverter gate)
removal" on page 4-393.
7558-xxx
No
Replace the connections.
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Go to step 3.
Replace the connections.
Diagnostic information
Previous
Next
Go Back
2-225