Exit Sensor 1 Late Jam - Lexmark X95x Series Service Manual

Step Action and questions
Perform a print test. Go to
4
"PRINT TESTS" on page
Does the error continue?

202.03 Exit Sensor 1 Late Jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (fuser exit) for
2
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (fuser exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (fuser exit) for
3
proper connection.
Is the above component
properly connected?
Check the registration drive
4
motor assembly for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Registration motor.
Does the above component
operate properly?
Check the registration motor for
5
proper connection.
Is the above component
properly connected?
Yes
Replace the Upper printer engine
card assembly.
3-26.
Go to
"Upper printer engine
PCBA removal" on page
Yes
Go to step 2.
Go to step 4.
Replace the fuser assembly.
Go to
"Fuser assembly
removal" on page
Go to step 6.
Replace the registration drive
motor.
Go to
"Registration drive motor
removal" on page
No
Problem resolved
4-189.
No
Remove any media or media
fragments.
Go to step 3.
Replace the connection.
4-87.
Go to step 5.
Replace the connection.
4-150.
Diagnostic information
7558-xxx
Previous
Next
Go Back
2-105