Sensor (Booklet Knife Hp) Lag Jam - Lexmark X95x Series Service Manual

381.38 Sensor (booklet knife HP) lag jam

Step Action and questions
Check the booklet unit interface
1
connector assembly.
Is the above component free of
damage?
Check the main connector on the
2
booklet unit sensor interface
cable assembly.
Is the above component free of
damage?
Check the main connector on the
3
booklet unit motor interface cable
assembly.
Is the above component free of
damage?
Check the sensor (booklet knife
4
HP) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (booklet knife
HP).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
5 Is the sensor (booklet knife HP)
properly connected?
Check the booklet knife solenoid
6
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Booklet knife
solenoid.
Does the above component
operate properly?
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 6.
Replace the sensor (booklet knife
HP). Go to
"Sensor (booklet
knife HP) removal" on
page 4-388.
Go to step 8.
7558-xxx
No
Replace the booklet unit interface
contact.
Replace the booklet sensor
interface cable assembly.
Replace the booklet motor
interface cable assembly.
Go to step 5.
Replace the connection.
Go to step 7.
Diagnostic information
Previous
Next
Go Back
2-213