Sensor (Adf Pre Registration) Late Jam (Side 2) - Lexmark X95x Series Service Manual

7558-xxx

282.13 Sensor (ADF pre registration) late jam (side 2)

Step Action and questions
Check the media path.
1
Is the media path free of any
media or media fragments?
Check the ADF rollers for wear.
2
Is the ADF feed/pick roller
assembly or the ADF
separation roller guide free of
excess wear?
Check the inverter gate.
3
Is the inverter gate free of
damage and warpage, and
does it move smoothly?
Check the sensor (ADF pre
4
registration) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch ADF/SCANNER
SENSOR TESTS.
4. Touch Sensor (ADF pre
registration).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (ADF pre-
5
registration) for proper
connection.
Is the above component
properly connected?
Check the ADF registration motor
6
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch ADF/SCANNER
MOTOR TESTS.
4. Touch ADF registration
motor.
Does the above component
operate properly?
Service Manual
2-146
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 6.
Replace the sensor (ADF pre-
registration). Go to
"Sensor
(ADF pre-registration)
removal" on page 4-247.
Go to step 8.
No
Remove any media or media
fragments.
Clean or replace the ADF feed/
pick roller assembly or the ADF
separation roller guide. Go to
"ADF feed/pick roller assembly
4-213, or
removal" on page
"ADF separation roller guide
removal" on page 4-226.
Replace the ADF sensor actuator
guide. Go to
"ADF sensor
actuator guide removal" on
page 4-225.
Go to step 5.
Replace the connections.
Go to step 7.
Previous
Next
Go Back