7558-xxx
402.01 Sensor (bridge media exit) static jam
Step
Action and questions
Check the sensor (bridge unit
1
media exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (bridge media
exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (bridge unit
2
media exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (bridge media
exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (bridge media
3
exit) connection.
Is the above sensor properly
connected?
Check the bridge drive motor for
4
proper operation.
Caution: When
performing motor
tests, ensure that all
cover and door
interlock switches
are overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Bridge unit motor.
Does the above component
operate properly?
Check the bridge drive motor
5
connection.
Is the above component
properly connected?
Service Manual
2-220
Yes
Go to step 4.
Go to step 4.
Replace the sensor (bridge
media exit).
Go to
"Sensor (bridge media
exit) removal" on page
4-317.
Go to step 6.
Replace the bridge drive motor.
Go to
"Bridge drive motor
removal" on page
4-306.
Go to step 6.
No
Go to step 2.
Go to step 3.
Replace the connection.
Go to step 5.
Replace the connection.
Previous
Next
Go Back