Sensor (Lower Media Exit) Static Jam - Lexmark X95x Series Service Manual

Step Action and questions
Check the sensor (upper media
3
exit) for proper connection.
Is the above component
properly connected?
Check the buffer/transport motor
4
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Buffer/transport
motor.
Does the above component
operate properly?
Check the buffer/transport motor
5
for proper connection.
Is the above component
properly connected?
Check the finisher controller
6
PCBA for proper connection.
Is the above component
properly connected?
POR the machine.
7
Does the error continue?

486.01 Sensor (lower media exit) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Yes
Replace the sensor (upper media
exit).
Go to
"Sensor (upper media
exit) removal" on page 4-409.
Go to step 6.
Replace the buffer/transport
motor.
Go to
"Stepper motor (buffer/
transport) and belt (buffer/
transport) removal" on
page 4-417.
Go to Step 5.
Replace the finisher controller
PCBA.
Go to
"Finisher PCBA removal"
on page 4-356.
Yes
Go to step 2.
7558-xxx
No
Replace connections.
Go to step 5.
Replace the connection.
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Diagnostic information
Previous
Next
Go Back
2-233