Drive Enable; Engine Idle Select; Check Engine Light - Genie Z-135/70 Operator's Manual

Second Edition · Fourth Printing

Drive Enable

Light on indicates that the
primary boom has moved past
either circle-end wheel and the
drive function is turned off.
To drive, activate the drive enable function and
slowly move the drive/steer control handle off
center. Push the drive enable button or move the
drive enable switch.
If the drive/steer control handle is not moved within
two seconds of activating the drive enable function,
the drive function will not operate. Release and
activate the drive enable function again.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
When the drive enable light is on, the axles cannot
retract.
Part No. 114474
Operating Instructions
Engine Idle Select (rpm)
Select the engine idle (rpm) setting. Move the
switch or push the button. The indicator light next
to the current setting will be on.
· Rabbit and foot switch symbol:
foot switch activated high idle
· Turtle symbol: low idle
· Rabbit symbol: high idle

Check Engine Light

Light on and engine stopped: Tag
the machine and remove from
service.
Light on and engine still running:
Contact service personnel within 24
hours.
Z-135/70
Operator's Manual
51