Transport And Lifting Instructions; Free-Wheel Configuration For Winching - Genie Z-135/70 Operator's Manual

Operator's Manual

Transport and Lifting Instructions

Observe and Obey:
Genie provides this securement information as a
recommendation. Drivers are solely responsible
for making sure machines are properly secured
and the correct trailer is selected pursuant to
US Department of Transportation regulations,
other localized regulations, and their company
policy.
Genie customers needing to containerize any lift
or Genie product should source a qualified
freight forwarder with expertise in preparing,
loading and securing construction and lifting
equipment for international shipment.
Only qualified aerial lift operators should move
the machine on or off the truck.
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial label for the
machine weight.
58
Be sure the turntable is secured with the
turntable rotation lock before transporting. Be
sure to unlock the turntable for operation.
Do not drive the machine on a slope that
exceeds the slope or side slope rating. See
Driving on a Slope in the Operating Instructions
section.
If the slope of the transport vehicle bed exceeds
the uphill or downhill maximum slope rating, the
machine must be loaded and unloaded using a
winch as described.
Free-wheel Configuration for
Winching
Chock the wheels to prevent the machine from
rolling.
Release the wheel
brakes by turning
over all four drive
hub disconnect
caps.
Be sure the winch line is properly secured to the
drive chassis tie points and the path is clear of all
obstructions.
Reverse the procedures described to re-engage the
brakes.
Note: The pump free-wheel valve should always
remain closed.
Z-135/70
Second Edition · Fourth Printing
Disengage
Engage
Part No. 114474