Generator; Aircraft Protection Package; After Each Use; Platform Out Of Level (P22 Code) - Genie Z-135/70 Operator's Manual

Second Edition · Fourth Printing

Platform Out of Level (P22 code)

Bypass key position to be used to level the
platform if ground control display shows platform
out of level (P22) and platform level controls do not
work.
To operate:
1 Turn the engine off.
2 Turn the main key switch to ground control.
Remove the key from the main key switch and
insert the key into the bypass/recovery key
switch.
3 Turn the bypass/recovery
key switch to the bypass
position.
4 Using auxiliary/emergency
power, operate the platform
level buttons to level the
platform.
5 Turn the bypass/recovery key switch to the run
position.
6 Remove the key from the bypass/recovery key
switch and insert the key into the main key
switch.
7 Push in and then pull out the red Emergency
Stop button.
8 If the P22 code is still visible, tag and remove
the machine from service until the fault has
been corrected by a qualified service technician.
Part No. 114474
Operating Instructions
Generator (if equipped)
To operate the generator, press the generator
button or move the generator switch. The indicator
light will come on and the engine will continue to
run.
Plug power tools into the power to platform GFCI
outlet.
To turn off the generator, push the generator button
or move the switch. The indicator light will turn off.

Aircraft Protection Package

(if equipped)
If the platform bumper comes into contact with an
object, the machine will shut down and no functions
will operate.
1 Start the engine.
2 Press down the foot switch.
3 Activate the function override function. Move the
switch or push the button.
4 Activate the appropriate function button, control
handle or toggle switch to move the machine
away from aircraft components.

After Each Use

1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is between
the circle-end wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.
Z-135/70
Operator's Manual
53