Genie Z-135/70 Operator's Manual page 29

Second Edition · Fourth Printing
18 Dual axis proportional control handle for drive
and steer functions OR Proportional control
handle for drive function and thumb rocker for
steer function.
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Move the control handle in the
direction indicated by the blue triangle and the
machine will steer to the left. Move the control
handle in the direction indicated by the yellow
triangle and the machine will steer to the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Press the left side of the thumb
rocker and the machine will steer to the left.
Press the right side of the thumb rocker and the
machine will steer to the right.
19 Steer mode control with indicator lights
Move the switch or push the button to choose
steer mode.
The indicator light next to the current steer mode
will be on.
20 Single axis proportional control handle for
secondary boom up/extend and down/retract
function
Move the control handle up and the secondary
boom will raise and then extend. Move the
control handle down and the secondary boom
will retract and then lower.
Part No. 114474
21 Drive control with indicator lights
Move the switch or push the button to choose
the drive setting. The indicator light next to the
current setting will be on.
22 Thumb rocker for jib boom extend/retract
function
Push the top of the rocker switch and the jib
boom will retract. Push the bottom of the rocker
switch and the jib boom will extend.
23 Dual axis proportional control handle for jib boom
up/down and platform rotate left/right functions
Move the control handle up and the jib boom will
raise. Move the control handle down and the jib
boom will lower. Move the control handle to the
left and the platform will rotate to the left. Move
the control handle to the right and the platform
will rotate to the right.
24 Axle extend/retract switch with indicator lights
Move the axle select switch to chose an axle
setting. The indicator light will flash while the
axles are extending and stay on when the axles
are fully extended. The indicator light will flash
while the axles are retracting and stay on when
the axles are fully retracted.
25 Drive enable control with indicator light
Light on indicates that the primary boom has
moved past either circle-end wheel and the drive
function is turned off. To drive, move the drive
enable switch or push the drive enable button
and slowly move the drive/steer control handle
off center.
Z-135/70
Operator's Manual
Controls
27