Panel Cradle Operation - Genie Z-135/70 Operator's Manual

Second Edition · Fourth Printing

Panel Cradle Operation

1 Secure both panel cradles to the platform.
2 Place the load so that it rests in both panel
cradles.
3 Center the load on the platform.
4 Secure the load to the platform using the strap.
Tighten the strap.
Part No. 114474
Operating Instructions
rubber
bumper 1
decal
hook
piece
padding
clamp
hook
Z-135/70
Operator's Manual
rubber
bumper 2
U-bolt
mounting
slots
panel
cradle
base
57