Work Area Safety; Electrocution Hazards; Tip-Over Hazards - Genie Z-135/70 Operator's Manual

Operator's Manual

Work Area Safety

Electrocution Hazards

Line Voltage
0 to 50KV
50 to 200KV
200 to 350KV
350 to 500KV
500 to 750KV
750 to 1000KV
12
This machine is not
electrically insulated
and will not provide
protection from contact
with or proximity to
electrical current.
Maintain safe distances
from electrical power
lines and apparatus in
accordance with
applicable
governmental
regulations and the
following chart.
Required Clearance
10 ft 3.0 m
15 ft 4.6 m
20 ft 6.1 m
25 ft 7.6 m
35 ft 10.6 m
45 ft 13.7 m
Z-135/70
Second Edition · Fourth Printing
Allow for platform movement, electrical line sway or
sag and beware of strong or gusty winds.
Keep away from the machine if it contacts
energized power lines. Personnel on the ground or
in the platform must not touch or operate the
machine until energized power lines are shut off.
Do not use the machine as a ground for welding.
Do not operate the machine during lightning or
storms.
Before performing service on this machine,
disconnect the batteries under both turntable
covers.

Tip-over Hazards

Occupants, equipment and materials shall not
exceed the maximum platform capacity.
Maximum platform capacity
Maximum occupants
The weight of options and accessories, such as
pipe cradles, panel cradles and welders, will reduce
the rated platform capacity and must be subtracted
from the platform capacity. See the decals with the
options and accessories.
If using accessories, read, understand and obey
the decals, manuals and instructions with the
accessory.
600 lbs 272 kg
2
Part No. 114474