Platform Control Panel - Genie Z-135/70 Operator's Manual

Operator's Manual
Controls

Platform Control Panel

1 Horn button
Press the button and the horn will sound.
Release the button and the horn will stop.
2 Platform not level indicator light
Level the platform until the light is off. The
switch will only work in the direction that will
level the platform.
3 Machine on incline indicator light
Light on indicates all functions have stopped.
See the instructions in the Operating
Instructions section.
4 Lower primary boom indicator light
Lower the primary boom until the light is off.
5 Lower / retract secondary boom indicator light
Lower/retract the secondary boom until the light
is off.
6 Used for optional equipment
7 Generator control with indicator light
(if equipped)
Move the switch or push the button to turn the
generator on. Move the switch again or release
the button to turn the generator off.
8 Emergency/Auxiliary power control with indicator
light
Use emergency/auxiliary power if the primary
power source (engine) fails.
Move and hold the switch, or push and hold the
button. Activate the desired function. The
indicator light will be on when emergency/
auxiliary power is being used.
26
9 Glow plug control with indicator light
Move the switch or push the button to activate
the glow plugs.
10 Engine start control with indicator light
Move the switch or push the button and the
engine will start. The indicator light will be on
when the switch is moved or the button is
pushed.
11 Engine idle control with indicator light
Move the switch or push the button to select
engine idle setting. The indicator light next to
the current engine idle setting will be on.
12 Not used
13 Power indicator light
Light on indicates the machine is on.
14 Check engine indicator light
Light on indicates an engine fault.
15 Low fuel indicator light
Light on indicates the machine is low on fuel.
16 Fault indicator light
Light on indicates a system fault.
17 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
Z-135/70
Second Edition · Fourth Printing
Part No. 114474