Operation On Slopes Hazards; Fall Hazards - Genie Z-135/70 Operator's Manual

Second Edition · Fourth Printing

Operation on Slopes Hazards

Do not drive the machine on a slope that exceeds
the maximum uphill, downhill or side slope rating of
the machine. Slope rating applies only to machines
in the stowed position.
Maximum slope rating, stowed position
Platform downhill
Platform uphill
Side slope
Note: Slope rating is subject to ground conditions
and adequate traction. See Driving on a Slope in
the Operating Instructions Section.
Part No. 114474

Fall Hazards

45% (24°)
30% (17°)
25% (14°)
Do not enter or exit the platform unless the
machine is in the stowed position and the platform
is at ground level.
Z-135/70
Operator's Manual
Work Area Safety
Occupants must wear a
safety belt or harness
in accordance with
governmental
regulations. Attach the
lanyard to the anchor
provided in the
platform.
Do not sit, stand or
climb on the platform
guard rails. Maintain a
firm footing on the
platform floor at all
times.
Do not climb down from
the platform when
raised.
Keep the platform floor
clear of debris.
Lower the platform
entry mid-rail or close
the entry gate before
operating.
15