Ground Control Panel - Genie Z-135/70 Operator's Manual

Operator's Manual
Controls

Ground Control Panel

1 LCD readout screen
a b c
a low fuel indicator
b engine oil pressure indicator
c water temperature indicator
d auxiliary power indicator
e high engine rpm indicator
f hour meter
2 Red Emergency Stop button
Push in red Emergency Stop button to the off
position to stop all functions and turn the engine
off. Pull out the red Emergency Stop button to
the on position to operate the machine.
3 Glow plug button
Push the glow plug button and hold for 3 to 5
seconds.
4 Key switch for off/ground/platform selection
Turn the key switch to the off position and the
machine will be off. Turn the key switch to the
ground position and the ground controls will
operate. Turn the key switch to the platform
position and the platform controls will operate.
5 Engine start button
Push the engine start button and the engine will
start.
6 Jib boom up/down buttons
Push the jib boom up button and the jib boom
will raise. Push the jib boom down button and
the jib boom will lower.
22
d e f
Z-135/70
Second Edition · Fourth Printing
7 Platform level up/down buttons
Push the platform level up button and the level
of the platform will raise. Push the platform level
down button and the level of the platform will
lower.
8 Primary boom extend/retract buttons
Push the primary boom extend button and the
primary boom will extend. Push the primary
boom retract button and the primary boom will
retract.
9 20A circuit breaker for system circuit
10 Alarm
11 Bypass/recovery key switch
Bypass key position to be used to level the
platform if ground control display shows
platform out of level (P22) and platform leve
controls do not work. Refer to the operating
instructions.
Recovery key position should only be used by
trained and authorized personnel.
12 Platform rotate left/right buttons
Push the platform rotate left button and the
platform will rotate to the left. Push the platform
rotate right button and the platform will rotate to
the right.
13 Jib boom extend/retract buttons
Push the jib boom extend button and the jib
boom will extend. Push the jib boom retract
button and the jib boom will retract.
14 High speed function enable button
Push the high speed function enable switch to
enable the functions on the ground control panel
to operate at high speed.
Part No. 114474