Operating Envelope Indicator Lights - Genie Z-135/70 Operator's Manual

Operator's Manual
Operating Instructions
Operating Envelope Indicator
Lights
The operating envelope indicator lights will come on
to notify the operator that a function has been
interrupted and/or an action is required by the
operator.
Lower/Retract Secondary Boom
indicator light flashing: Lower/
retract the secondary boom until
the indicator light is off.
Lower Primary Boom indicator
light flashing: Lower the primary
boom until the indicator light is
off.
Machine Not Level indicator light
flashing: The tilt alarm will be
sounding when this light is
flashing. Move the machine to a
firm, level surface.
52
If the tilt alarm sounds with the platform uphill:
1 Lower the primary boom.
2 Retract/lower the secondary
boom.
3 Retract the primary boom.
If the tilt alarm sounds with the
platform downhill:
1 Retract the primary
boom.
2 Retract/lower the
secondary boom.
3 Lower the primary
boom.
Platform Not Level indicator
light flashing: The tilt alarm
will be sounding when this
light is flashing. The Platform
Level toggle switch will only
work in the direction that will
level the platform. Level the
platform until the indicator
light is off.
Z-135/70
Second Edition · Fourth Printing
Part No. 114474