Genie Z-135/70 Operator's Manual page 25

Second Edition · Fourth Printing
15 Low speed function enable button
Push the low speed function enable switch to
enable the functions on the ground control panel
to operate at low speed.
16 Emergency/Auxiliary power button
Use emergency/auxiliary power if the primary
power source (engine) fails.
Simultaneously push the emergency/auxiliary
power button and activate the desired function.
17 Turntable rotate left/right buttons
Push the turntable rotate left button and the
turntable will rotate to the left. Push the
turntable rotate right button and the turntable will
rotate to the right.
18 Secondary boom up/extend and down/retract
buttons
Push the secondary boom up/extend button and
the secondary boom will raise and then extend.
Push the secondary boom down/retract button
and the secondary boom will retract and then
lower.
19 Primary boom up/down buttons
Push the primary boom up button and the
primary boom will raise. Push the primary boom
down button and the primary boom will lower.
20 LCD screen control buttons
Part No. 114474
21 Engine speed select button
Push the engine speed select button to select
the engine speed. When the arrow above the
rabbit is lit, the engine is in high idle speed.
When the arrow above the turtle is lit, the engine
is in low idle speed.
22 Primary boom down button
Push the primary boom down button and the
primary boom will lower.
23 Primary boom up button
Push the primary boom up button and the
primary boom will raise.
24 Not used
Z-135/70
Operator's Manual
Controls
23