Test The Foot Switch; Test Machine Functions; Test The Steering - Genie Z-135/70 Operator's Manual

Second Edition · Fourth Printing

Test the Foot Switch

40 Push in the platform red Emergency Stop button
to the off position.
41 Pull out the red Emergency Stop button to
the on position but do not start the engine.
42 Press down the foot switch and attempt to start
the engine.
Result: The engine should not start.
43 Do not press down the foot switch and restart
the engine.
44 Do not press down the foot switch and test each
machine function.
Result: No machine functions should operate.

Test Machine Functions

45 Press down the foot switch.
46 Activate each machine function control handle,
toggle switch or button.
Result: All functions should operate through a
full cycle.
Part No. 114474

Test the Steering

47 Select square-end (blue arrow) steer.
Push the square-end (blue arrow)
steer button or move the steer mode
switch.
48 Press down the foot switch.
49 Slowly move the drive/steer control handle in
the direction indicated by the blue triangle on
the control panel OR press the thumb rocker
switch in the direction indicated by the blue
triangle.
Result: The square-end wheels should turn in
the direction that the blue triangles point on the
drive chassis.
50 Slowly move the drive/steer control handle in
the direction indicated by the yellow triangle on
the control panel OR press the thumb rocker
switch in the direction indicated by the yellow
triangle.
Result: The square-end wheels should turn in
the direction that the yellow triangles point on
the drive chassis.
51 Select circle-end (yellow arrow) steer.
Push the circle-end (yellow arrow) steer
button or move the steer mode switch.
52 Press down the foot switch.
53 Slowly move the drive/steer control handle in
the direction indicated by the yellow triangle on
the control panel OR press the thumb rocker
switch in the direction indicated by the yellow
triangle.
Result: The circle-end wheels should turn in the
direction that the blue triangles point on the
drive chassis.
Z-135/70
Operator's Manual
Inspections
35