Work Area Safety - Genie Z-45 XC Operating Manual

Hide thumbs Also See for Z-45 XC:
Table of Contents

Advertisement

First Edition • First Printing

Work Area Safety

Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Line Voltage
0 to 50KV
50 to 200KV
200 to 350KV
350 to 500KV
500 to 750KV
750 to 1000KV
Allow for platform movement, electrical line sway
or sag, and beware of strong or gusty winds.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for welding.
Part No. 1268193GT
Obey all local and
governmental regulations
regarding required
clearance from electrical
power lines. At a
minimum, the required
clearance contained in the
chart below must be
followed.
Required Clearance
3.05 m
4.60 m
6.10 m
7.62 m
10.67 m
13.72 m
Keep away from the
machine if it contacts
energized power lines.
Personnel on the ground
or in the platform must not
touch or operate the
machine until energized
power lines are shut off.
Tip-over Hazards
Occupants, equipment and materials shall not
exceed the maximum platform capacity.
Maximum platform capacity
Unrestricted range of motion
Maximum occupants
Maximum platform capacity
Restricted range of motion
Maximum occupants
Maximum platform capacity
Unrestricted range of motion
Machine equipped with Aircraft
Protection Package
Maximum occupants
Maximum platform capacity
Restricted range of motion
Machine equipped with Aircraft
Protection Package
Maximum occupants
If the platform load is greater than 301 kg, or
274 kg with Aircraft Protection Package do not
move the platform into the unrestricted range of
motion zone.
Do not exceed the maximum platform capacity.
Do not attach a platform rated at 300 kg
(unrestricted range of motion) or 454 kg (restricted
range of motion) to machines with any other rated
load. See the serial label for the maximum rated
load.
The weight of options and accessories, such as
pipe cradles, panel cradles and welders, will
reduce the rated platform capacity and must be
subtracted from the platform capacity. See the
decals with the options and accessories.
If using accessories, read, understand and obey
the decals, instructions and manuals with the
accessory.
Z-45 XC
Operator's Manual
Work Area Safety
300 kg
2
454 kg
3
273 kg
2
427 kg
3
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents