SERVICE LEVEL FUNCTIONS
1.18 MODEM SIGNAL DETECTION TEST (FUNCTION 11)
1. Enter the fax service mode.
2. Press
.
3. Press one of the following numbers, as
required:
Modem signal detection test on
–
an analog line
Modem signal detection test on a
–
digital (ISDN) line
NOTE: An optional G4 interface is
required to test a modem signal
on an ISDN line.
4. Press
5. Choose the modem signal type to be
detected at the keypad, then press
To stop the test, press
6. Exit the service mode.
1.19 RINGER TEST (FUNCTION 11)
1. Enter the fax service mode.
2. Press
3. Press
4. Press
then
To stop the test, press
5. Exit the service mode.
1.20 STAMP TEST
1. Enter the fax service mode.
2. Press
3. Press
then
To stop the test, press
4. Exit the service mode.
SM
.
.
.
4-10
.
A194M522.img
A194M523.img
A194M526.img
A194M522.img
A194M523.img
A194M535.img
A194M522.img
A194M536.img
(A639)