Key Counter Holder Installation - Ricoh A193 Service Manual

Rev. 3/13/97

2.8 KEY COUNTER HOLDER INSTALLATION

1. Remove the caps [A].
2. Secure the front key counter bracket [B] (1 screw).
3. Secure the rear key counter bracket [C] (1 screw).
4. Install the stepped screw [D] into the front key counter bracket.
5. Plug the connector [E] into the rear key counter bracket.
⇒
6. Select user tool, select system, enter 18 on key pad. Enter 6 on key pad.
Select "Yes", press "OK". Exit user tools.
7. Set SP5-113 to "1" to enable key counter operation.
SM
[A]
A193I043.wmf
[B]
3-19
COPIER INSTALLATION
[E]
[C]
A193I044.wmf
[D]
(A193)