Original Exit Sensor Replacement - Ricoh A193 Service Manual

5.11 ORIGINAL EXIT SENSOR REPLACEMENT

1. Remove the front and rear cover.
2. Release the lever [A] and open the original guide [B].
3. Remove the original exposure guide [C] (1 screw).
4. Remove the upper original guide [D] (4 screws, 1 connector).
5. Replace the original exit sensor from the upper original guide (1 screw, 1
connector).
SM
REPLACEMENT AND ADJUSTMENT
[B]
[A]
11-33
[C]
[D]
(A661)