Paper Reversing Mechanism - Ricoh A193 Service Manual

DETAILED DESCRIPTIONS

2.2 PAPER REVERSING MECHANISM

[A]
When the face-up mode is selected, the paper is sent downward into the
finisher unit towards the staple unit. The paper is transported at
180mm/second until the trailing edge of the paper passes through the copier
exit sensor (not shown). After the copier exit sensor is de-activated, the paper
transport speed will be increased to 500 mm/second.
When the trailing edge of the paper passes through the inverter sensor [A],
the transport motor will momentarily turn off. The transport motor will then
turn on in the reverse direction to feed the paper upward to the shift tray
(image down).
(A666) 12-7 SM