Sp Modes - Ricoh A193 Service Manual

4.12 SP MODES

6-006-1 ADF Side-to-Side Registration
See Copy Adjustment Printing/Scanning in Replacement and Adjustment.
6-006-2 ADF Leading Edge Registration
See Copy Adjustment Printing/Scanning in Replacement and Adjustment.
6-006-3 ADF Trailing Edge Registration
See Copy Adjustment Printing/Scanning in Replacement and Adjustment.
6-007 ADF Sub-scan Magnification
See Copy Adjustment Printing/Scanning in Replacement and Adjustment.
6-009 ADF Free Run
After starting the Free Run ( 1 + # + # ), the ADF automatically cycles
without exposing when an original is placed on the original table. Jams
are detected.
6-010
Stamp Position Adjustment
The default position is shown below. The position can be adjusted in the
sub-scan direction.
6-901
ADF Original Sensor Output Display
See the SP mode table.
SM
REPLACEMENT AND ADJUSTMENT
10 ± 5mm
12 ± 5mm
A628O507.wmf
7-25 (A628)