Service Program Mode; Service Program Mode Operation; Service Program Access Procedure; Accessing Copy Mode From Within An Sp Mode - Ricoh A193 Service Manual

SERVICE PROGRAM MODE

2. SERVICE PROGRAM MODE

2.1 SERVICE PROGRAM MODE OPERATION

The service program (SP) mode is used to check electrical data, change
modes, and adjust values.

2.1.1 Service Program Access Procedure

1) How to enter the SP mode
Press the following keys in sequence.
→
ý
ö ú ý
õ
Hold the key for more than 3 seconds. (the digit 7 key will not beep
when pressed)
2) How to exit SP mode
ö
Press the key or the exit key three times.

2.1.2 Accessing Copy Mode from within an SP Mode

1. Press the Interrupt key.
2. Select the appropriate copy mode and make trial copies.
3. To return to the SP mode, press the Interrupt key again.
(A193)
A193M505.wmf
→ →
ð ê
4-4
→
õ
SM