G4 Parameter Programming (Function); File Printout (Function); Tcr/Journal Printout (Function) - Ricoh A193 Service Manual

1.21 G4 PARAMETER PROGRAMMING (FUNCTION 12)
NOTE: An optional G4 interface is required to access this function.
1. Enter the fax service mode.
 
2. Press
3. Press one of the following numbers, as

required:
ISDN IP (International Prefix)

–
G4 SN (Subscriber Number) Main

–
G4 SN (Subscriber Number) Sub

–
ISDN G3 SN (Subscriber
–
Number) Main

ISDN G3 SN (Subscriber
–
Number) Sub

G4 Subaddress

–
ISDN G3 Subaddress
–
4. Program the selected item.
5. Exit the service mode.
NOTE: After changing any of the G4 parameters, be sure to turn both of the
ac switches off and on, so that the new settings become effective.
1.22 FILE PRINTOUT (FUNCTION 13)
1. Enter the fax service mode.
 
2. Press
The machine prints all the files stored in
the SAF memory, including confidential
messages.
NOTE: Do not use this function, unless the customer is having trouble
printing confidential messages or recovering from the memory
lock status.
1.23 TCR/JOURNAL PRINTOUT (FUNCTION 14)
1. Enter the fax service mode.
 
2. Press
3. Either:
Choose All - The machine prints all the
communication records on the report.
(A639)

then
4-11
SERVICE LEVEL FUNCTIONS
A194M527.img
A194M537.img
A194M538.img
A194M528.img
SM