11.3 ADF IMAGE ADJUSTMENT
11.3.1 Registration and Blank Margin
A193R516.wmf
NOTE: Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of
the feed stations.
2. Check the registration, and adjust using the following SP modes if
necessary.
Side-to-side Registration
Leading Edge Registration (Simplex)
Trailing Edge Blank Margin
11.3.2 Sub Scan Magnification
NOTE: Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of
the feed stations.
2. Check the registration, and adjust using SP 6-007 if necessary. The
specification is ± 1%.
SM
COPY ADJUSTMENT PRINTING/SCANNING
B
A
A: Sub scan magnification
A193R526.wmf
5-43
A
A: Leading Edge Registration
B: Side-to-side Registration
A193R515-2.wmf
SP mode
SP6-006-1
SP6-006-2
SP6-006-3
(A193)