Simm Module - Ricoh A193 Service Manual

3.4 SIMM MODULE

NOTE: 1) If the printer controller is already installed, remove the printer
controller to install the SIMM module.
2) Before install the SIMM module, confirm that it satisfies the
requirements below.
SIMM Requirements
Type
Number of pins
Access speed
Capacity
Parity
1. Install the SIMM module(s) [A] in the slot(s) (J1, J2) on the printer
controller [B].
NOTE:If you install only one SIMM module, it may be installed in either
slot J1 or J2. If a second SIMM is installed, both SIMMs must be
identical.
2. Install the printer controller along the guides (4 screws). (See 3.1. Printer
Controller.)
3. Replace the interface cover (3 screws). (See 3.1. Printer Controller.)
(A643)
PC Compatible
72
70 ns or faster
1, 2, 4, 8, or 16 MB
Any OK
1-18
[A]
[B]
A643I504.wmf
SM