Ricoh A193 Service Manual page 927

Model: 9925DP
Dirty background Problem (Refer to RTB42)
-Vt correction
-Mixing time
(New SP mode)
•SP2-994: Vcont offset
•SP9-999-14: Additional Mixing time display
(For USA only)
New SP is added.
SP5-950: LG size paper detection on the by pass tray.
∗ When this function is selected and LT
in the by-pass tray, the machine detects it as LG
size paper.
(For USA only)
Correspond to the Energy Star standard.
After the fax transmission through ARDF with a stammer, the registration of the 1st
copied paper by ARDF is delayed.
New SP is added.
SP5-949:1= When one of the trays is empty, the paper end indicator (red LED)
lights.
The DF Jam display is cleared by DF lifting up and down
(New SP Mode)
SP6-006-4: ARDF Main-Scan Registration of the rear side.
(Specification)
When the trays do not have the different direction papers (same size), the machine
continues to print by sort function even if the Rotate Sort function is selected.(The
previous version softwave stops the copy job when one of tray is empty)
Stapler may not work when the printer feeds out the paper with staple while feeding
out the paper into the finisher in copy or fax mode.
When 2 sheets of paper remain in the Duplex Unit and the printer prints out the
image in the duplex mode, the printer image will be printed on the rear side of the
remaining paper.
A2245532
E
F
H
K
Savin Corporation
Technical Service Operations – P.O. Box 10270, Stamford, Connecticut 06904 --- (203) 967-5000
Date: March 26, 1998
Symptom Corrected
size is inserted
S/N CUT-IN
9A37060001∼
9A37080001∼
9A37090001∼
TBA
No: 9925 - 002
USA
K
K
H
H
H
F
F
E
E
E
E
Page 2 of 2