Psu Board - Ricoh A193 Service Manual

9.3 PSU BOARD

[B]
1. Remove the rear cover. (See Rear Cover).
2. Disconnect the connectors from the right half of the IOCSS board,
remove the 4 screws that secure the bracket, and swing out the IOCSS
board otward. (See MSU Board/BICU Board.)
3. Remove the power supply cord bracket [A] (3 screws and 2 connectors).
4. Disconnect all connectors from the PSU board.
5. Remove the PSU board bracket assembly [B] (4 screws).
SM
A193R038.wmf
5-37
OTHERS
[A]
(A193)