Service Program Mode Tables; Main Sp Mode Table - Ricoh A193 Service Manual

SERVICE PROGRAM MODE

2.2 SERVICE PROGRAM MODE TABLES

2.2.1 Main SP Mode Table

NOTE: 1) In the Function column, comments are in italics.
2) In the Settings column, the default value is in bold letters.
3) An asterisk " * " after the mode number indicates that this mode is
stored in the NVRAM. If the RAM is reset, all these SP modes will
return to their factory settings.
Mode No.
Class
Class 3
1 and 2
Leading Edge
Registration
(Normal
copying, and
1
duplex 1st
side)
1-001 *
Leading Edge
Registration
(Duplex: 2nd
side)
2
Side-to-Side
Registration
(1st paper
feed)
1
Side-to-Side
Registration
1-002 *
(2nd paper
2
feed)
Side-to-Side
Registration
(3rd paper
3
feed: Option
PFU tray 1)
(A193)
Function
Adjusts the printing leading edge
registration using the Trimming Area
Pattern (SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 3 ± 2 mm. See
"Replacement and Adjustment - Copy
Image Adjustments" for details.
Adjusts the printing leading edge
registration using the Trimming Area
Pattern (SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 3 ± 2 mm. See
"Replacement and Adjustment - Copy
Image Adjustments" for details.
Adjusts the printing side-to-side
registration from the 1st paper feed
station using the Trimming Area Pattern
(SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 2 ± 1.5 mm. See
"Replacement and Adjustment - Copy
Image Adjustments" for details.
Adjusts the printing side-to-side
registration from the 2nd paper feed
station using the Trimming Area Pattern
(SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 2 ± 1.5 mm.
Adjusts the printing side-to-side
registration from the 3rd paper feed
station using the Trimming Area Pattern
(SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 2 ± 1.5 mm.
4-6
Settings
+9 ~ -9
0.1 mm/step
+ 0.0 mm
+12.5 ~ -12.5
0.1 mm/step
+ 0.0 mm
+9 ~ -9
0.1 mm/step
+ 0.0 mm
+9 ~ -9
1 mm/step
+ 0.0 mm
+9 ~ -9
1 mm/step
+ 0.0 mm
SM