11
11.4
Displaying the Administrator Management screen
In order to change Administrator Management settings, display the Adminis-
trator Management screen.
To display the Administrator Management screen
1
Press the [Utility/Counter] key.
The Utility/Counter screen appears.
2
Touch [Admin. Management].
The Administrator Code screen ap-
pears.
3
Use the keypad to type in the 8-digit
administrator access code, and then
touch [Enter].
–
To change the entered value,
press the [C] (clear) key, and then
enter the correct value.
–
To cancel changes to the set-
tings, touch [Cancel].
The Administrator Management
screen appears.
4
Touch [Admin. 1] or [Admin. 2].
–
To exit the Administrator Man-
agement screen, touch [Enter] in
each screen until the Basics
screen appears.
11-24
Utility mode
250/350