Automatically Selecting The Paper Size ("Auto Paper Select" Setting) - Konica Minolta bizhub 250 User Manual

Basic copy operation

Automatically selecting the paper size ("Auto Paper Select" setting)

The size of the loaded document is detected, and copies are produced using
paper of the same size.
If the "×1.0" Zoom setting was specified, paper of the same size as the doc-
ument is selected.
If the zoom ratio was increased or decreased, a paper size that corresponds
to the specified zoom ratio is automatically selected.
1
In the Basics screen, touch [Paper].
The Paper screen appears.
2
Touch [Auto Paper Select].
!
Detail
If the document size cannot be detected, remove the document, and then
load it again.
If a document with an irregular size is loaded, specify the paper size man-
ually. (Refer to "Manually selecting the desired paper size" on page 3-26.)
250/350
3
3-25