Bluetooth (B736); Checking The Connections - Ricoh B156 Service Manual

Rev. 06/2006
⇒

1.15.6 BLUETOOTH (B736)

CAUTION
Disconnect the main machine's power cord before you start this procedure.
NOTE: You can only install one of these network interfaces at the same time: IEEE
802.11b (Wireless LAN), IEEE1284 (Parallel/Centronics), IEEE1394
(FireWire), Bluetooth.
1. Remove the slot cover [A] from I/F
Card Slot B (
2. Install the Bluetooth board [B]
(Knob-screw x 2).
NOTE: Use a screwdriver when
you tighten the knob-
screws. Do not tighten
them manually. It can
cause this board to
disconnect from the
machine.
3. Install the Bluetooth card [C] in the
slot of the Bluetooth board.
4. Attach the antenna cap [D].

1.15.7 CHECKING THE CONNECTIONS

1. Plug in the power cord and turn on the main switch.
2. Enter the printer user mode and print the configuration page.
(User Tools/ Printer Settings/ List Test Print/ Config. Page)
The same data can also be printed using the printer service mode.
("Print Summary"
All installed options are listed in the "System Reference" column.
SM
CÓPIA NÃO CONTROLADA
x 2).
[D]
5.2.1)
CÓPIA NÃO CONTROLADA
[A]
[B]
[C]
1-59
PRINTER OPTIONS
B736I001.WMF
B156/B220