Shpf Booklet Maker Pre-Feed Roller Removal - Lexmark MS911 Service Manual

Installation notes:
a
Position both aligners at the middle.
b
Install the shaft, with the metal portion of the aligners hanging down.

SHPF booklet maker pre-feed roller removal

1
Remove the front door. See
2
Remove the top inner cover. See
3
Remove the rear cover. See
4
From the front, remove the clip (A), and then remove the bearing.
"SHPF front door removal" on page
"SHPF top inner cover removal" on page
"SHPF rear cover removal" on page
Repair information
421
336.
336.
339.
4021, 7421