500-Sheet Drawer (3Tm)-One-Way Clutch / Gear Assembly Removal - Lexmark X940e Service Manual

7510
3X 500-sheet drawer (3TM)—one-way clutch / gear assembly removal
1. Remove the media feed unit assembly.
(tray 2)" on page 4-215
page 4-213.
2. Remove the harness from the bracket (A).
3. Remove the three screws securing the bracket (A) to the media feed unit assembly.
4. Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5. Remove the tray lift one-way clutch (B).
6. Remove the tray lift one-way gear 24 tooth (C).
Replacement note: Before re-installing, ensure all gears and washers are securely attached to the bracket (A).
4-218
Service Manual
See"3X 500-sheet drawer (3TM)–media feed unit assembly removal
"3X 500-sheet drawer (3TM)–media feed unit assembly removal (tray 3)" on
or
Harness
Clamp
A
Rear
Harness
A
Rear
Washer
B
Washer
C