Midi Globals; Basic Channel; Midi Mode - E-Mu ESI-32 Operation Manual

Omni Mode - The ESI-32 receives MIDI
data on any and all channels, but plays only
the current preset.
Poly Mode - The ESI-32 receives MIDI data
only on the selected MIDI channel, and plays
the current preset.
Multi Mode - (Multi LED lit) The ESI-32
receives MIDI data on any and all channels,
and plays the preset assigned to each MIDI
channel in the Multi screen.
78
ESI-32 Operation Manual
MIX C=01 Submix=main
Mzzz 111z zzzz zzzz
6. Press ENTER to exit the submodule. The ESI-32 will return to the
Module Identifier.

2. MIDI Globals

MIDI (Musical Instrument Digital Interface) is a universal interface
which allows the exchange of musical information between various
electronic instruments. The global MIDI parameters affect the entire ESI-
32.
1. Activate Master/Global module.
2. Select 9. MIDI, 2. MIDI Globals (9/2). This submodule contains
four pages, as selected with the cursor/page buttons.
3. Move the cursor to the parameter(s) to be adjusted, and select
the desired value(s) with the data entry control. The first page
shows:

Basic Channel:

MIDI Mode:

Rcv Prog Change:
• Basic MIDI Channel: This is the default channel over which the
ESI-32 will send and receive MIDI information.
• MIDI Mode: In Omni mode, the ESI-32 will receive data
transmitted over any of the 16 MIDI channels. In Poly mode, the
preset will receive data only over the specified channel.
• Receive Program Change: When this function is turned Off, the
ESI-32 will ignore incoming MIDI program change commands.
When On, the ESI-32 responds to MIDI program changes normally.
4. Select page two by pressing the right cursor button. Pages 2
through four select which MIDI continuous controllers will be
received by the ESI-32. The second page shows:
Pitch Control -> pwh
Mod Control ->
Pressure Control–>chp
MIDI GLOBALS
1
omni
on
MIDI GLOBALS
1