Knobs Deep Edit; Knobs/Riff Midi Out; Preset Edit All Layers Enable - E-Mu Proteus 1000 Operation Manual

Knobs Deep Edit

Knobs/Riff MIDI Out

Preset Edit All Layers
Enable
48 E-MU Systems
This parameter specifies whether or not the front panel controller knobs
can be used to edit parameter values in the Master or Edit menus. This is
called "Deep-Editing." With Knob Deep Edit disabled, the front panel
controller knobs retain their function as real-time controllers even when in
the Master or Edit modes.
KNOBS DEEP EDIT
disabled
This function allows you to select whether or not MIDI controller data is
transmitted when you turn the front panel Controller knobs. The knobs
transmit on the controller numbers defined by the Real-time Controller
Assign parameter (see page 45). This function also enables or disables trans-
mission of Riff note data over MIDI when the Audition button is pressed.
If Deep Edit is enabled, "Knobs MIDI Out" does not work while in any of
the editing menus (Master, Edit, Save/Copy).
KNOBS/RIFF MIDI OUT
don't transmit
This function allows you to turn the Edit All Layers feature on or off. "Edit
All Layers" is an Edit menu feature which allows you to select all layers (A)
in order to edit all four layers simultaneously. Because this feature can be
confusing to the beginning programmer, it can be disabled here in the
Master menu. Check this feature out when you're ready. It's great!
PRESET EDIT ALL LAYERS
enabled
Master Menu
MIDI Parameters