Velocity; Duration; Repeat - E-Mu Xtreme Lead-1 Manual

Arpeggiator/Beats Menu
Master Arpeggiator Parameters

Velocity

Duration

Repeat

68 E-MU Systems
Each note in the pattern plays using either a preset velocity value (from
1 through 127), or using the actual velocity of the played note (ply).
Note: Velocity values will not have an effect on the sound unless velocity is
programmed to do something in the preset.
This parameter sets the length of time for the current step, defined as a note
value, based on the Master Tempo. The selectable note durations are
described below.
1/32 32nd Note
1/16t 16th Note Triplet
1/32d Dotted 32nd Note
1/16 16th Note
1/8t 8th Note Triplet
1/16d Dotted 16th Note
1/8 8th Note
1/4t Quarter Note Triplet
1/8d Dotted Eighth Note
1/4 Quarter Note
Each step can be played from 1 to 32 times. A repeat setting of "1" indicates
the step will be played one time (not repeated one time or played twice).
To Edit a User Pattern
The first field in the Edit User Pattern field defines the pattern's step
1.
number. Start with the pattern Step 01.
Define the Key Offset, Velocity, Duration and Repeat values.
2.
Repeat steps 1 and 2 until you have setup the desired number of steps
3.
in the pattern.
Set the Key Offset to "End" on the last step in the pattern.
4.
1/2t Half Note Triplet
1/4d Dotted Quarter Note
1/2 Half Note
1/1d Dotted Whole Note
1/1t Whole Note Triplet
1/2d Dotted Half Note
1/1 Whole Note
2/1t Double Whole Note
Triplet
2/1 Double Whole Note