Multichannel Track Recording - E-Mu XL-7 Command Station Owner's Manual

Multichannel Track
Recording
O O O O
The Channel Assignment
screen is a MIDI rechannelizer.
The Multi A or B assignments
allow multiple MIDI channels on
a track.
98 E-MU Systems
Each of XL-7's 16 tracks can contain multichannel MIDI data. Because
tracks can be routed internally or externally on either of the two MIDI
ports, the XL-7 sequencer can actually control up to 64 separate MIDI
channels (16 internal-A, 16 internal-B, 16 MIDI port-A, 16 MIDI port-B).
Once a track is enabled for multichannel recording you can record into it
using the rubber keypads or external MIDI data.
To Setup a Track for Multichannel Recording
Select the pattern you wish to record.
1.
Playback Setup (steps 2-7 set up the track for multi-channel play back)
Press the Pattern Edit button.
2.
Scroll to the Select Track Changes screen shown below using the data
3.
entry control.
T
01 CHANNEL ASSIGN
Channel: 01A:
Select the desired track.
4.
Set the track to MultiA or MultiB.
5.
Select the desired destination for the track (internal, external or both).
6.
Press the Pattern Edit button again to exit the module.
7.
Continue on to Record a Multichannel Track using the Rubber Keypads...
Press the Controllers button and make sure "Keyboard/Knob Channel"
8.
is set to "Basic". This feature automatically changes the channel of the
keypad to whatever channel is shown in the preset view display.
Make sure the multichannel track you set up (step 4 above) is selected.
9.
Set the Pattern Length.
10.
Ready to Record
Press the Preset View button.
11.
Select a preset for channel 01A.
12.
Press Record, then Play. Start playing!
13.
Record Channel 2
Select channel 02A.
14.
Select a preset for channel 02A.
15.
Press Record, then Play. Start playing!
16.
Continue to record channels.
17.
Pattern Edit Menu
Dest:both
Sequencer