Mitsubishi 1989-1993 GALANT Service Manual page 793

AUTOMATIC TRANSAXLE - Service Adjustment Procedures
TSB Revision
5. Loosen the locking nut to before the V groove of the
adjusting rod, and tighten 'the special tool (inner) until it
contacts the locking nut.
6. Engage the special tool (outer) on the lock nut.
Rotating the outer cylinder counterclockwise and the inner
cylinder clockwise, lock the locking nut and special tool
(inner).
7. Attach the torque wrench to the special tool (inner), and
repeat "tightening" and "returning" at a torque of 10 Nm
(7.2 ft.lbs.) two times. Then, tighten it to a torque of 5 Nm
(3.6 ft.Ibs.). Then, back off the special tool (inner) 2 to 2%
turns.
23-87