Mitsubishi 1989-1993 GALANT Service Manual page 1241

SERVICE BRAKES
Steel pips
0
SERVICE POINTS OF REASSEMBLY
11. REASSEMBLY OF SNAP RING
While using a 19 mm (.75 in.) diameter steel pipe to press
in the spring case, use the snap ring pliers to attach the
ring
snap ring to the caliper body.
Caution
Attach the snap ring to the caliper body with the
opening facing the bleeder.
ring
9. REASSEMBLY OF PISTON ASSEMBLY
(1) Push the piston into the caliper with special tool.
NOTE
Align the grooves as illustrated.
groove
placed in the grooves in the position.
TSB Revision