Mitsubishi 1989-1993 GALANT Service Manual page 975

ACTIVE-ELECTRONIC CONTROL SUSPENSION - Troubleshooting
2. Checking the individual ACTIVE-ECS indicators
After disconnecting the control unit's connector, turn the
nition kev to ON
All items shown in the tables on the next page are satisfied
when each terminal of the ACTIVE-ECS indicator's connector F
is grounded and the resistance is then measured.
All items shown in the tables on the next page are satisfied
when each terminal of the wiring harness connector discon-
is then measured.
I
Yes
Yes
TSB Revision
and the connector terminal.
ACTIVE-ECS malfunction
l
Damaged or disconnected wiring or large contact
l
No
resistance, between the ACTIVE-ECS indicator and the
connector of the control unit.
Poor or improper contact of the control unit and the con-
l
indicator