Mitsubishi 1989-1993 GALANT Service Manual page 932

FRONT SUSPENSION - Lower Arm
SERVICE POINTS OF REMOVAL
5. REMOVAL OF STABlLlZEk LINK MOUNTING NUTS
Using a wrench or similar tool to secure the ball studs at
both ends of the stabilizer link, remove the mounting nuts.
7. REMOVAL OF SELF-LOCKING NUT
Using the special tool, disconnect the lower arm ball joint
from the knuckle.
Caution
1. Be sure to tie the cord of the special tool to the
nearby part.
2. Loosen the nut but do not remove it.
INSPECTION
Check the bushing for wear and deterioration.
l
Check the lower arm for bend or breakage.
l
Check the clamp for deterioration or damage.
l
Check the ball joint dust cover for cracks.
l
Check all bolts for condition and straightness.
l
CHECKING OF BALL JOINT FOR STARTING TORQUE
grease.
joint starting torque.
Standard value: 3-10 Nm (26-87 in.lbs.)
value, replace the lower arm assembly.
.
of the
be reused unless it has