Mitsubishi 1989-1993 GALANT Service Manual page 1041

ACTIVE-ELECTRONIC
Insulator
rubber
7. INSTALLATION OF UPPER SPRING SEAT
(1) Install the spring upper seat to the piston rod, and
align the notched part of the piston rod and the hole in
the spring seat.
(2) Align the bead of the spring upper seat and the facing
direction of the knuckle bracket.
5. INSTALLATION OF STRUT INSULATOR MOUNTING
NUT
Nut tightening
strut assembly.
(2) Correctly align both ends of the coil spring with the
groove in the spring seat, and then loosen the special
tool.
(3) Using the special tool, hold the spring upper seat in
place and tighten the strut insulator installation nut.
Spring upper seat
(4) Apply a coating of multipurpose grease to the insulator
bearing channel.
Caution
When coating with grease, take care that the grease
does not adhere to the insulator rubber part.
I
to the