Mitsubishi 1989-1993 GALANT Service Manual page 1219

SERVICE BRAKES
pin
Caliper /support
(pad, clip, shim)
SERVICE POINTS OF
When disassembling the front disc brakes, disassemble both
sides (left and right) as a set.
2. REMOVAL OF CALIPER SUPPORT (PAD, CLIP, SHIM)
Remove caliper support from caliper body.
6. REMOVAL OF BOOT RING
Remove boot ring *with (-) screwdriver
7. REMOVAL OF PISTON BOOT/8. PISTON
Protect caliper body with cloth. Blow compressed air
through brake hose to remove piston boot and piston.
Caution
Blow compressed air gently.
9. REMOVAL OF PISTON SEAL
Caution
Do not use ( - ) screwdriver or other tool to prevent
damage to inner cylinder.
ethylene, alcohol or specified brake fluid.
Specified brake fluid: Conforming to DOT3 or DOT4
INSPECTION
Check cylinder for wear, damage or rust.
l
Check piston surface for wear, damage or rust.
l
Check caliper body or sleeve for wear.
l
Check pad for damage or adhesion of grease, check
l
backing metal for damage.
DISASSEMBLY