Mitsubishi 1989-1993 GALANT Service Manual page 976

ACTIVE-ELECTRONIC CONTROL SUSPENSION
Control unit wiring
ACTIVE-ECS indicator
harness connector
connector terminal No
terminal No
All termrnals are not
earthed
I
1
2
3
5
7
9
10
11
13
14
15
17
19
NOTE
"SPORT" mode is applicable for 1990, 1991, 1992, 1993 models
l
*: Applicable to 1989 models only.
vehicle-height indicator illuminate.
76 In addition to the "SOFT" and "NORM" indicators, the "MEDIUM" damping
88 In addition to the "SOFT" and "NORM" indicators, the "SOFT"*' switch
indicator also illuminates.
90 Connect a circuit tester and
measure the resistance when
the control mode and
are pressed
77 In addition to the "SOFT" and "NORM" Indicators. the "HIGH" switch
indicator also illuminates
In addition to the "SOFT" and "NORM"
illuminates.
In addition to the "SOFT" and "NORM" indicators, the "SOFT" swatch
87
75 The "NORM" vehicle-height rndicator illumination stops, and the "HIGH"
vehicle-height indicator illuminates; the "SOFT" damping force characteristic
indicator remains illuminated.
85 The "NORM" vehicle-height Indicator illumination stops, and the "LOW"
vehicle-height indicator illuminates; the "SOFT" damping force characteristic
indicator remains illuminated.
In addition to the "SOFT" and "NORM" indicators, the "AUTO" switch
indicator also illuminates.
80 In addition to the "SOFT" and "NORM" indicators, the alarm light
illuminates.
86 In addrtion to the "SOFT" and "NORM" indicators, the "MEDIUM" and
"HARD" damping force characteristic indicators also illuminate
The "SOFT" damping force characterrstic indicator and the vehicle-herght
indicator illuminate.
The buzzer sounds.
The "SOFT" and "NORM" indicators become slightly dimmer when terminal
20 is connected to terminal 19
TSB Revision
Normal
SOFT
I
I