13-246
FUEL SYSTEM <DOHC>
inspection and adjustment.
Engine coolant temperature: 85-95°C (185-205°F)
l
Lights, electric cooling fan and accessories: OFF
l
Transaxle: Neutral
l
Connect the scan tool to the data link connector (white).
NOTE
When the scan tool is connected, the diagnostic test mode
control terminal is grounded.
(3) If the scan tool is not used, follow the steps below.
connector shown in the figure at the left.
Take care not to disconnect the connector.
Caution
The paper clip should be inserted between the termin-
als as shown in the figure at the left.
meter to the paper clip.
TSB Revision
(P for vehicles with an automatic transaxle)
tacho-